Every day to understand a whole house custom custom wardrobe, do not ignore the hardware - hinge

Although the hardware in the custom closet is only one-tenth of the total value, it is a vital part of the life and comfort of the wardrobe. Nearly 90% of the after-sales problems come from the wardrobe, a custom-made wardrobe is not easy to use, durable hardware needs to be selected.

The hinge manufacturer tells you that the hardware in the wardrobe is also divided into functional hardware and hardware.

The base hardware is indispensable, including the hinge of the door panel, the slide rail of the drawer, the slide rail of the sliding door, and the like. If these hardware are not installed or the quality is not good, it will affect the opening and service life of the door panels, drawers and sliding doors.

Hinge, also known as hinge, is the primary hardware accessory for linking cabinets and cabinet doors. In the application of closing wardrobes, hinges are considered to be called, so it is very important to distinguish the quality of hinges. 1. Look: good quality clothes cabinet door hinge of the front cover and the base are very solid, and precision workmanship, smooth and burr-free, high intensity. The poor quality wardrobe door hinge is rough, the forging surface is thin, and the strength is poor. 2. 掂: A product of the same specification, if a quality is relatively heavy, clarify the high density of the product, the producers choose the material is relatively hard, the quality is more guaranteed. 3. Look at the brand big brands in order to their own credibility will always strictly control the quality, so if you do not distinguish between good and bad, a better way is to believe in the brand.

Although the hinge is simple, the type, number of hinges, and selection of the device method are also very important. Otherwise, the method of hinge mounting is not right.

There are three common types of door hinges. According to the position of the door cover, the cover is divided into full cover (also known as straight bend and straight arm). The door cover covers the side plate by 18mm. The half cover (also known as the middle bend and the curved arm) means that the door cover covers the side plate. Mm, built-in (also known as big bend, Daqu) means that the side panels cover the door panel. According to the cover method of the door panel, choose the appropriate hinge.

The number of hinges depends on the size and weight of the door panel. It is not suitable to install four or five hinges for a small door or a hinge for a large door. There is one number of devices that use hinges for a long time, see the rules. Two hinge holes are machined in the door panel with a height of 1.900 mm or less. 2. The door panel with a height of less than 1600mm is machined with 3 hinge holes. 3. The door panel with a height of less than 2000mm is machined with 4 hinge holes. 4. The door panel with a height of less than 2400mm is machined with 5 hinge holes.

In addition to the commonly used hinges, there are special hinges that are equipped according to special needs, such as rebound door hinges. The ordinary hinge is a push door, the door panel can be actively closed, and the rebound hinge cannot. However, the rebound hinge can be equipped with a rebounder. With one press, the door will open automatically, suitable for some door panels without a handle.

According to the device method of the door panel, there is also a corresponding large angle hinge.