Hardware hinge

Five accessory manufacturers tell you what is a hardware hinge ?

The hardware hinge is a common name for the hinges. It is responsible for connecting the cabinet and the door panel. In the ordinary cabinet application, the hinge is more tested. Therefore, it is also one of the more important hardware of the cabinet.

Most of the hinges currently seen on the market are detachable, divided into two parts: the base and the buckle. The hinge generally has two points:

The card position and the three-point card position, the hinge of the three-point card position is of course better. If possible, try to pick a multi-pointed hinge. The so-called multi-point positioning means that the door panel can stay at any angle when it is open, the opening will not be laborious, and it will not be suddenly closed, and then the safety of the operation is ensured. This is especially important for the upper hanging cabinet door.

The key to choosing a hardware hinge is that if we choose a hardware hinge, we need to look at the following key points:

1. Look at the raw materials. The brand's cabinet hardware is almost always cold-rolled steel, stamped and formed at one time, with a thick hand and a smooth appearance. Moreover, because the outer plating layer is thick, it is not easy to rust, strong and durable, and has strong bearing capacity, and the cabinet door is stretched freely, and the door is not tightly displayed. The residual hinge is generally stamped from the corner iron. The thickness of the material is unstable, and the device is loose and tight. The opening and closing is not smooth and sometimes the important part of the cooperation is too large, which greatly affects the service life. The use of a good spring and a poor spring is also the key to the quality of the hinge. With a poor spring, there is no resilience. If you use it for a long time, it will lose its elasticity, resulting in a tight cabinet door and even cracking.

2. By hand. Different hinges have different feels. The hinges with excellent quality are soft when opening the door. When they are closed to 15 degrees, they will rebound actively and the resilience is very uniform. The residual hinge has a short service life and is simple to drop. For example, the cabinet door and the hanging cabinet fall down, mostly because the quality of the hinge is not closed.

There is a little trick:

The hinge can be opened at 95 degrees, and the two ends of the hinge are pressed hard by hand to investigate that the support spring is not deformed or broken, and the product is qualified to be highly qualified. The residual hinge has a short service life and is simple to drop. For example, the cabinet door and the hanging cabinet fall down, mostly because the quality of the hinge is not closed.

The short story said that I hope the above content will help and understand the people in need.